When The Winding Machine Is Installed In The Correct Way On The Appropriate Foundation

For the use of Winding Machine business, the requirements of the site is to build suitable for winding equipment and placement of the foundation or table to meet the Winding Machine on the location of the environment requirements, the specific requirements generally have the following:
1. Winding Machine table and foundation must be compatible with the base of the type of Winding Machine, and to ensure that the installation of the Winding Machine is firm and reliable, to ensure a reliable grounding around the equipment to ensure that there is no large interference around the source The
2. Winding Machine table and foundation should have sufficient strength and stiffness, to avoid Winding Machine high-speed dynamic vibration generated when the Winding Machine to ensure that the vibration does not affect their own accuracy and life, not shock and affect the coil Quality, adjacent equipment and buildings should not be wound
Machine has a bad effect.
3. Winding Machine table and foundation should have stability and durability, waterproof and non-slip and harmful objects to ensure that no deformation or local subsidence. When the Winding Machine is placed in an environment where it is likely to suffer from chemical liquids, fluids or corrosion, the foundation should be covered with a protective layer. For example, the surface of the foundation coated with anti-acid, anti-oil cement slurry, and set drainage, collecting groove.
4. The center of gravity of the Winding Machine and the center of gravity of the table and foundation are located on the same vertical line as the centripetal force of the foundation.
5. Large-scale Winding Machine foundation should be preloaded before installation of the machine. The quality of the preload is 1.25 times the total mass of the Winding Machine and the sum of the maximum mass of the customer workpiece. Preload can be made of steel, sand and small stones. Preload should be evenly pressed on the foundation to ensure that the foundation is evenly sinking. Preloading work to be carried out to the ground no longer continue to sink so far.
When the Winding Machine is installed in the correct way on the appropriate foundation, the Winding Machine can not be deformed, worn and vibrated at high speed, so that the body rigidity and coil quality of the Winding Machine can be maintained for a long time. Small and medium-sized Winding Machine, you need a relatively strong workstations, the need for the workstations need to install the appropriate shock absorber, if the Winding Machine to install the fulcrum and the distribution of the number of improper or fixed method is unreasonable, it will affect the machine Performance and longevity. Before dismantling the Winding Machine, it must first be clear that the dismantling of the Winding Machine should serve the principle of assembly. If the technical information (such as electrical drawings, mechanical drawings, etc.) of the dismantling winder is incomplete, and there is no actual technical support from the original manufacturer, the written text and even the record must be recorded in the dismantling process. So that after the completion of the installation.
Most electrical products need to use enameled copper wire (referred to as enameled wire) around the induction inductance coil, you need to use the Winding Machine. For example: a variety of motors, fluorescent lamp ballasts, all kinds of transformers, televisions. Radio in the week, the induction coil, the line output transformer (high pressure package), electronic ignition, mosquito killer high-voltage coil, speakers, headphones, microphone voice coil, a variety of welding machines can not be an example, Of the coils need to be wound around the Winding Machine. Textile industry, multi-purpose cotton yarn, man-made fiber lines, such as winding a variety of textile machines for the yarn group, flaws are needed to use a Winding Machine around. Commonly used Winding Machine winding line for the enameled copper wire (around the electronic, electrical products, inductance coil), the textile line (around the textile machine with the yarn blossom, thread), as well as around the heating device Hotline and solder lines, wires, cables and so on. A wide range of Winding Machines, classified according to their use, can be divided into general-purpose and special type; Universal - from one or several lines for the installation of a variety of frame winding Winding Machine. Common general-purpose enameled wire Winding Machine is equipped with a garden around the axis called "single-head machine", according to such a pile of "double-headed machine" 3 machine "... ..." 6 machine "Special type - is equipped with a fixed special winding chuck, can only wound a coil Winding Machine; common special Winding Machine; one, wound transformer square transformer special machine; 1, square transformer (Large ring machine, the ring machine, small ring machine) 3, other types of transformer-specific transformer Winding Machine process requirements: (1) can be done (2) in the whole operation process, the required tension pendulum stability; (3) a parking immediately implement the brake action. Pu-7100 series inverter in the transformer Winding Machine production line to use, to achieve the Winding Machine system automatic speed control, the inverter output frequency can be through the motherboard terminal on the external potentiometer in the range of 0.0 ~ 800.00Hz adjustable.