Three Trends Of Future Development Of Electrotechnical Equipment

Electrotechnical Equipment is a typical electrical machinery processing and production equipment, the entire production and processing technology is the structure between the enameled wire finishing and winding process. The main trends in the development of automation technology for Electrotechnical Equipment in the future of technological development include the following three main types of automation products, including control systems, drive control, motion control, man-machine interface and sensors. aspect:
First, the modular function of the controller will get more applications
Modular function of the controller can be based on the different requirements of Electrotechnical Equipment, and flexible configuration relative to the PLC has a strong computing power, communication convenience, the advantages of lower cost, Electrotechnical Equipment control requirements are relatively simple and fixed, very suitable for the application Modular modular controller, the current Electrotechnical Equipment is more used in PLC and CNC dedicated controller.
Second, high capacity, multi-functional models will be universal
At present, the main Electrotechnical Equipment and single-head winding processing, the function is more single, long linkage winding will greatly improve the efficiency of Electrotechnical Equipment and production, the design can effectively reduce the complexity of the equipment, improve drive efficiency, Process adjustment, reduce maintenance. At present, the processing of electromagnetic coil, motor coil and ballast coil has been used in a long linkage technology; Electrotechnical Equipment is a step of the coil processing, the future development will enable a variety of functions integrated into the coil fully automated processing, testing, A variety of auxiliary processes.
Third, the development and customization of special models
There are many types of coil processing, the use of wire and the requirements of all kinds, for those who have special requirements of the coil processing, domestic manufacturers have chosen to give up, after a few years of technology digestion and absorption, Electrotechnical Equipment manufacturers technical force Are in the growth, for those who have special requirements of the models, can also be much easier to deal with, with the processing capacity of manufacturers to enhance the custom cycle is also shortened.
According to the actual work of Electrotechnical Equipment and the previous fault records, can be found due to Electrotechnical Equipment design or production process defects caused by accidental failure, through continuous improvement and improvement of system software or hardware to solve. These modifications are provided in the form of maintenance information to the maintenance personnel of the (Shanghai Longbao Wire Equipment Company). Through these customer feedback, the company can be used as a basis for troubleshooting, correct and thorough eradication of failure, the user is reasonable feedback is my company constantly improve the powerful help.
In short, the Electrotechnical Equipment maintenance of the first step is to be based on the phenomenon of failure, as soon as possible to identify the real causes of failure and fault location, these failure methods, the actual use of no strict boundaries, and sometimes only one way to rule out the failure , May also need a variety of methods at the same time. Its effect depends mainly on the experience of maintenance technicians and their understanding of the principles and structure of the system and the depth of the master. This is both maintenance personnel must have the quality, but at the same time on the maintenance staff made a very high demand, it requires CNC Electrotechnical Equipment maintenance personnel familiar with the structure of Electrotechnical Equipment and design ideas, familiar with the performance of CNC Electrotechnical Equipment, the only way to Quickly find out the cause of the failure to determine the fault location, in addition, maintenance in order to some of the circuit and parts for field mapping, as a senior maintenance staff should also have a certain ability to draw engineering drawings.