Machines Used Drag Chain Cables And Tubing On Attention
1. drag chain cable must not touch each other or stuck together., certain spacing between each other, the cable must be loose laid side-by-side in drag chain as possible arranged separately, separated by a spacer, or into separate holes in the overhead block, drag chain cables in the space between the cable diameter should be at least 10%;
2. it is important to note that the minimum bending radius of the cable, make sure that the cable completely in the bending radius, that is, not forced to move. Cable guide unit or with each other, this can be relatively mobile. After a period of operation, it is best to check the position of the cable. This check must be carried out after the push-and-pull is moved;
3. the cable laying cannot twist, that is from the reel or drum at one end of the cable to unlock cables, cables should be spinning reel or drum, if necessary, cables or hang up. Cables for the applications can only be made directly from the cable drum;
4. the two cables must be fixed, or at least movement in the drag chain ends must be fixed. General cable moved some distance from the end of the towline should be 20-30 times the cable diameter;
5. the most noteworthy thing, if the towline snapped, the cable needs to be replaced, damaged due to excessive stretching can not be avoided.