Influence Of Supporting Environmental Factors On The Use Of Electrotechnical Equipment

Influence of supporting environmental factors on the use of Electrotechnical Equipment
    Electrotechnical Equipment is the electrical manufacturing industry indispensable equipment, the use of the environment on the impact of Electrotechnical Equipment is a lot of users ignore the link, when the equipment appears poor stability, no cause failure and other issues should focus on external reasons, Electrotechnical Equipment control system Precision electrical system, has a powerful operator, precise step controller and other components, any interference factors will cause the work of Electrotechnical Equipment is not normal.
First, the power supply
If the Electrotechnical Equipment compared to a car, then the power is gasoline, power quality of the electrical work of the Electrotechnical Equipment plays an extremely important role in the factory inevitably have high-power equipment, when these devices start and stop when the factory voltage There will be ups and downs, this abnormal power changes, will seriously affect the Electrotechnical Equipment controller of the normal work, if long-term over-rated voltage or lower than the rated voltage, the electrical components of the equipment will be fault, the spindle Motor power, the motor abnormal temperature rise and so on the situation, the first should be investigated whether the power is normal.
Second, the factory dust and moisture
The factory environment has a direct impact on the life of Electrotechnical Equipment, Electrotechnical Equipment long-term work in a serious dust shop, the controller heat sink and many oil-lubricated parts will gather a lot of dust and produce sludge, these dust seriously affect the controller Normal heat dissipation and lubrication of moving parts.
Three vibration and electromagnetic interference
Electrotechnical Equipment is a precision Electrotechnical Equipment, has a complex control system, vibration and electromagnetic interference is the natural enemies of the controller, the vibration will affect the normal contact with the circuit, the line loose, poor contact failure is the culprit of vibration, electromagnetic interference in our Life is also more common, such as mobile phones will affect the normal work of the radio, when there is a strong electromagnetic interference source when the Electrotechnical Equipment controller will be operational errors, frequent alarm and a series of problems.
   Many of the automatic Electrotechnical Equipment customers in the purchase of equipment according to the factory set and configuration use, there are some customers need to change the Electrotechnical Equipment parts and functions in order to meet their own production process, Electrotechnical Equipment in the design and manufacturing are generally left There is a certain position margin to facilitate maintenance, replacement parts, etc., the use of this margin customers can do some improvement, but all the improvements must be in the maximum allowable equipment, unauthorized blind modification equipment will damage the device.
        Electromechanical equipment Spindle is the power axis that provides the rotating power to pull the enameled wire. The adjustment of the spindle of the Electrotechnical Equipment is not the same. The adjustment of the spindle of the Electrotechnical Equipment generally includes the following aspects: the position of the shaft, the concentricity adjustment, Line process, the adjustment of the shaft position is generally due to the Electrotechnical Equipment in the winding process between the spindle and the distance between the table does not meet the production process requirements, each process requires a certain work space, the adjustment of the shaft position to pay attention to the fuselage The size of the hole position, whether the adjustment will affect the normal operation of other parts; concentricity adjustment is the most common, Electrotechnical Equipment in the run after a period of time between the bobbin and thimble will be the degree of concentricity deviation, the need for timely maintenance Adjustment.